Aladdin-light-lift ALL1000RM-CM-240V Manuel d'utilisateur télécharger pdf (Page 12)

STEP 20

Loosely fasten chandelier pulley assembly to suitable structure using 7/16” x 4” hex tap bolts, 7/16” nylon

lock nuts and 3/8” USS at washers. See Diagram L.

STEP 21

Adjust ceiling box elevation up or down to be ush with sheetrock. Use 3/32” Allen wrench on conduit

coupler to loosen bottom set screw. Conduit is telescopic. e ceiling box should not touch inside of ceiling

hole. Retighten bottom setscrew on conduit coupler and conrm top set screw is tight. See Diagram L.

Never attach or adjust the conduit assembly and chandelier pulley assembly improperly. is could

interfere with the automatic shuto system and could cause the chandelier to fall, which could cause

death, personal injury, and/or property damage.

7/16” x 4” Hex Tap Bolt (QTY 4)

3/8” USS Flat Washers (QTY 8)

7/16” Nylon Lock Nuts (QTY 4)

SheetrockSheetrock

4 1/2”(11.4cm)Hole

Diagram L

Conduit Coupler

Top Set Screw

3/32” Allen Wrench

Conduit Coupler

Bottom Set Screw

3/32” Allen Wrench

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 20 21

Pas de commentaire

Aladdin-light-lift ALL1000RM-CM-240V Manuel d'utilisateur Page 12