Aladdin-light-lift ALL300RM-CM Manuel d'utilisateur télécharger pdf (Page 18)

STEP 38

Tighten xture coupler set screws using supplied 3/32” Allen wrench. Fixture coupler set screws have

thread lock already applied at factory. See Diagram S.

STEP 39

Apply supplied liquid thread lock to all ttings including xture coupler and screw collar loop ttings. See

Diagram S.

Never attach the chandelier to the ALL300RM improperly. Failure to secure the xture coupler set

screws and properly apply thread lock could cause the chandelier to fall, which could cause death,

personal injury, and/or property damage.

STEP 40

Replace canopy and screw collar ring. Conrm adjustment of canopy and telescopic conduit assembly

allows contact plates to meet before the canopy touches the ceiling. See Diagram S.

Never allow the chandelier canopy to make contact with the ceiling before the contact plates meet. is

could interfere with the automatic shuto system and could cause the chandelier to fall, which could

cause death, personal injury, and/or property damage.

Bottom Screw Collar Ring

Canopy

Tighten Set

Screws with

3/32” Allen

Wrench

Diagram S

Bottom Contact

Plate Must Meet

Top Contact Plate

Before Canopy

Touches Ceiling

1 2 ... 13 14 15 16 17 18 19 20 21 22

Pas de commentaire

Aladdin-light-lift ALL300RM-CM Manuel d'utilisateur Page 18