ALL200 TROUBLESHOOTING GUIDE cont.
1. Conrm ALL200 is at the CEILING POSITION. If not, use the controller to operate the ALL200 to
the CEILING POSITION. Chandelier will only light at the CEILING POSITION. If operated to the
CEILING POSITION and the chandelier will still not light, proceed to step 2.
2. Conrm light switch in the square box is turned on. e square box is mounted on the chassis plate of
the ALL200, right in front of the control board. If it was found in the o position, ip it to the on position
and to test the chandelier. If chandelier still does not light, proceed to step 3.
3. Turn the motor and light switch in the square box to the o position. Conrm light fuse is good. e
light fuse is held to the control board by fuse clips and is located right in front of the light relay. Remove
and perform a continuity test on the light fuse. If the fuse reads continuity, place it back in the fuse clips.
If it does not read continuity, it must be replaced with a new, 15 amp, fast blow fuse. If the ALL200 was
equipped with a 2200 watt upgrade package, replace with a new, 20 amp, fast blow fuse. Turn the motor
and light switch in the square box to the on position, and test the chandelier. If the chandelier still does not
light, proceed to step 4.
4. From where the ALL200 is installed, call Aladdin Light Lift technical support Monday through Friday
during normal business hours at (877) 287-4601. A voltage meter will be needed to further test the
ALL200.
SYMPTOM: ALL200 WILL NOT SHUT OFF PROPERLY AT CEILING POSITION:
Discontinue use immediately and contact Aladdin Light Lift at (877) 287-4601.
After all troubleshooting is complete, replace dust cover.
Warranty Agreement
Aladdin Light Lift, Inc. warrants its chandelier light lift unit for one year from the date of
purchase. e warranty includes all parts provided the unit is installed properly by a licensed
electrician. Labor charges will be the responsibility of the purchaser. If the unit does not operate
properly, the purchaser must contact a factory authorized service technician approved by Aladdin
Light Lift, Inc. to determine if the unit was installed properly. e technician will furnish a written
report to the purchaser and Aladdin concerning any problem with the lift system which will be
binding on all parties concerned. All defective parts must be returned to Aladdin Light Lift, Inc.
for the warranty to apply. Any alteration or by-passing of the electrical or mechanical system of
exceeding the wattage maximum (as indicated on the lift) will void the warranty and can result in
an electrical hazard. is warranty agreement showing date of purchase and distributor must be
lled out at www.aladdinlightlift.com/warranty-card.php within 30 days of purchase to validate the
warranty. Call your distributor to obtain the name of a factory authorized technician in your area.
(21 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels