Aladdin-light-lift ALL200-CM-240V Manuel d'utilisateur télécharger pdf (Page 3)

STEP 1

Determine where ALL200 will mount on ceiling joists. ALL200 must be installed level, in an accessible

location directly above chandelier.

Never mount the ALL200 o plane or unlevel in a standard installation. is could cause the chandelier

to fall, which could cause death, personal injury, and/or property damage. e winch cable must hang

plumb through the center of the top contact plate on the ceiling box.

Never install the ALL200 where the ceiling height exceeds 1.5m less than the exact length of winch

cable. For example, if the ALL200 is equipped with a 35ft (10.6m) cable, do not install the ALL200 in

a ceiling that is greater than 30ft (9.1m). is could cause the cable to become reverse wrapped on the

winch. An ALL200 installed with a reverse wrapped cable could cause the chandelier to fall, which could

cause death, personal injury, and/or property damage. Winch cable length can be found on the ALL200

product sticker, shipping box and the front page of these installation instructions.

STEP 2

After turning o power, remove and discard existing electrical box if present in ceiling. Only use ceiling box

provided with ALL200. See Diagram A.

Never remove an existing ceiling box while the power is connected. Electricity could cause death,

personal injury, and/or property damage.

STEP 3

Cut a 4 ½” (11.4cm) hole in ceiling for ceiling box. If you removed an existing ceiling box, existing hole may

need to be enlarged.

STEP 4

Attach conduit assembly to 3/4” conduit connector mounted below pulley. Once completely inserted,

tighten set screw on conduit connector. See Diagram A.

Never attach or adjust the conduit assembly improperly. is could interfere with the automatic shuto

system and could cause the chandelier to fall, which could cause death, personal injury, and/or property

damage.

ALL200 Ceiling Box

Telescopic Conduit Assembly

3/4” Conduit Connector

Diagram A

1 2 3 4 5 6 7 8 ... 12 13

Pas de commentaire

Aladdin-light-lift ALL200-CM-240V Manuel d'utilisateur Page 3